Affordable Home and Business Backup Generators
Sales - Installation - Maintenance - Service
For More Information Visit: www.GenerxPower.com
SERVING TAMPA BAY / FLORIDA REGION
|HOME||Affordable Generator Installation||Generator Maintenance / Service||Protect My Home From Power Failure|
How do I select a
generator that’s right for me?
The most accurate way is to have an electrician apply an amp meter to the circuits or appliances that will operate with emergency backup power. Measurements should be taken as the appliance starts up. That’s because start up requires the greatest amount of power. To eliminate the hassle of this process, GENERX Generators allows you to simply match your system to the existing circuits in your electrical panel. With our 8, 10, 14 or 16 circuit, pre-wired systems, we take the guesswork out of sizing. For customers concerned with air conditioning, the wattage rating of the generator and its circuit breakers inside the transfer switch should be reviewed so that A/C startup power requirements are met. For liquid-cooled models, a licensed electrician must perform a site survey to determine the size and voltage of the unit to meet your backup power needs.
COMPARE GENERAC GENERATORS
COMPARE GENERAC TRANSFER SWITCHES
HOW MUCH DOES IT COST FOR A GENERATOR: INSTALLED?
The entire process is really simple to us because we do this everyday! If you're located within western or central Florida (Pinallas County, Tampa, Lakeland) For more information about the backup generator that would meet your needs during a power outage or failure, please contact us at: (813) 814-5900 or visit or Main Website at: www.GenerxPower.com
Should be installed by a licensed electrician.
Refer to GENERX Generators for MORE INFO
long does it take to install an automatic standby generator?
GENERX Generators installs many different varieties of models, such as, GENERAC air-cooled models, which come equipped with a comprehensive installation manual, can take as little as four hours to install. They come pre-mounted on a composite pad to further simplify installation. Liquid-cooled generators normally require up to 14 hours to install. Because of their additional weight, liquid-cooled units must be installed on a stronger mounting surface such as a concrete slab.
Note: Time estimates are based on typical applications. Additional time may be required to run extended electrical conduit or bury gas piping or to place the unit far from the incoming gas or electrical service.
Do they have to be maintained?
Just like your car’s engine, generators need periodic oil and filter changes. Many customers rely on GENERX's Maintenance Plan to satisfy routine maintenance requirements. Refer to your owner’s manual for routine maintenance procedures and schedules. Any authorized GENERAC dealer can perform routine maintenance.
What is the advantage of an aluminum enclosure?
Aluminum is corrosion resistant, so it prolongs the life and look of the generator, particularly in coastal communities where salt air can quickly penetrate and corrode most metals. If it's too late and you already have a backup generator housing that has rusted and corroded, take a look at what we can offer you here: Watch This Generator Housing Replacement Video.
Maintenance Plans Offered By Florida's Elite Dealer:
|GENERXPOWER.COM - ALL RIGHTS RESERVED - COPYRIGHT 2011 - CREATED BY:|